Update for DKM Modular Extenders

This Update is only required when using the Mini USB Interface to update the DKM Extender Modules ACX1MT-DHID-xx and ACX1MR-DHID-xx 
and those with ACX1MT-HID/-ARH and DAH or ACX1MR-HID/-ARH and DAH interface.

When using the DKM Extenders with a DKM FX Switch you can update the Extenders centrally via the DKM FX Switch. See DKM FX Update Instructions!

Method 1:

Connect your Modular DKM Extender via Mini USB to USB Type A cable to your PC or Laptop.
Power Up the Extender. A new USB drive should be registered and initialized with your PC and an Explorer window pops up.
Copy the individual xx.pfw files over to that drive.

CONSOLE or Rx Modules ( ACX1MR- )

Use the following order:

Draco_10_CON.PFW
HIDCON.PFW

Modules with additional USB HID Interfaceboard require additionally

HIDCONEXT.PFW

At last copy:

MSD_Extender.PFW

Done!


CPU or Tx Modules ( ACX1MT- )

Use the following order:

Draco_10_CPU.PFW
HIDCPU.PFW

Modules with additional USB HID Interfaceboard require additionally

HIDCPUEXT.OFW

At last copy:

MSD_Extender.PFW

Done!

Method 2:

CONSOLE or Rx Modules ( ACX1MR- )

Run DracoCON.bat for ACX1MR-DHID-xx without HID daughter board module
Run DracoCONEXT.bat for ACX1MR-DHID-xx with HID daughter board module

CPU or Tx Modules ( ACX1MT- )

Run DracoCPU.bat for ACX1MR-DHID-xx without HID daughter board module
Run DracoCPUEXT.bat for ACX1MR-DHID-xx with HID daughter board module



Mark Hempel
mark.hempel@blackbox.com